Shuttle Orbiter / Cargo Standard Interfaces

(Core)

ICD 2-19001, Revison-L

Document Index

Note: This document index is linked to the separate files which comprise this document. The Adobe Acrobat Reader is required to open and read this document. Clicking on any of the files below will automatically cause the Adobe Acrobat Reader to open and display the contents of the file. If you are unsure of this process or do not know if the Adobe Acrobat Reader is installed on your machine you should contact your system administrator.

The contents of this document represent the most current Shuttle Orbiter/Cargo Standard Interface definition. Use of this document is described in Section 1.0, Scope. If you have any questions regarding the use, contents or corrections to this document please contact the responsible engineer.

The material herein may be downloaded and saved or printed at your site. It is recommended that you check this site for updates when using any material that has been previously downloaded. Also, be sure to refresh or reload the file from this site so that you are not viewing outdated information.

RETURN TO ICD HOME PAGE

This document has transitioned to the Automated Payload ICD System 2 (APLIS2). You should expect minor format adjustments that improve document appearance only; the most notable changes affect pagination and table format. There are no technical or content changes resulting from the transition.

COVER SHEET

CHANGE LOG

TABLE OF CONTENTS

1.0 SCOPE

2.0 APPLICABLE AND REFERENCE DOCUMENTS

3.0 PHYSICAL INTERFACES AND GEOMETRIC RELATIONSHIPS (Sections 3.0 thru 3.1)

3.2 INTERFACE LOCATION AND DIMENSIONING

3.3 PAYLOAD BAY INTERFACES (Sections 3.3 thru 3.3.1)

3.3.2 STANDARD INTERFACE PANEL (SIP) REQUIREMENTS

3.3.3 NON-STANDARD ELECTRICAL INTERFACES (INDEPENDENT OF SMCH)

3.3.4 FLUID AND UMBILICAL PANEL INTERFACES

3.3.5 MIDBODY ATTACHMENT OF CARGO ELEMENT WIRING; FLUID LINES AND OTHER LIGHTWEIGHT AIRBORNE SUPPORT EQUIPMENT (ASE)

3.4 CREW COMPARTMENT

4.0 STRUCTURAL AND CARGO BAY INTERFACES AND CONSTRAINTS (Sections 4.0 thru 4.1)

4.2 CREW MODULE AND PAYLOAD HABITABLE VOLUMES

4.3 GENERAL ACCELERATIONS

5.0 GENERAL FLUID INTERFACES AND REQUIREMENTS (Sections 5.0 thru 5.7)

5.8 SPECIFICATION OF FLUIDS AND GENERIC VENT CHARACTERISTICS

6.0 ENVIRONMENTAL INTERFACES - PASSIVE THERMAL CONTROL (Sections 6.0 thru 6.1)

6.2 ACTIVE THERMAL CONTROL

6.3 ATMOSPHERIC REVITALIZATION SYSTEM (ARS)

7.0 ELECTRICAL POWER INTERFACES AND ACCOMODATIONS (Sections 7.0 thru 7.2)

7.3 DC POWER (Sections 7.3 thru 7.3.1)

7.3.2 CARGO BAY PRIMARY PL BUS

7.3.3 CABIN PAYLOAD BUS

7.3.4 AUX PL A OR AUX PL B

7.3.5 AFT PL B OR AFT PL C

7.3.6 PL GSE POWER

7.3.7 DC POWER RIPPLE AND TRANSIENT LIMITS

7.4 AC POWER

7.5 LIMITATIONS ON CARGO UTILIZATION OF ELECTRICAL POWER

7.6 RETENTION SYSTEM POWER PROVISIONS AND ELECTRICAL CONNECTORS

8.0 AVIONICS INTERFACES - ATTACHED PAYLOAD CHARACTERISTICS (Sections 8.0 thru 8.2)

8.2.1 PAYLOAD DATA INTERLEAVER (PDI) INTERFACE

8.2.2 MULTIPLEXER / DEMULTIPLEXER (MDM) INTERFACE

8.2.3 MODULAR MEMORY UNIT (MMU1) INTERFACE

8.2.4 KU-BAND SIGNAL PROCESSOR INTERFACE

8.2.5 PAYLOAD SIGNAL PROCESSOR INTERFACE

8.2.6 S-BAND FM SIGNAL PROCESSOR INTERFACE

8.2.7 AUDIO CENTRAL CONTROL NETWORK INTERFACE

8.2.8 CCTV VIDEO CONTROL UNIT INTERFACE

8.2.9 CAUTION AND WARNING ELECTRONICS ASSEMBLY (CWEA) INTERFACE

8.2.10 MASTER TIMING UNIT (MTU) AND PAYLOAD TIMING BUFFER (PTB) INTERFACES

8.2.11 PAYLOAD SAFING-COMMAND INTERFACE

8.2.12 ORBITER TO CARGO ELEMENT DATA BUS SYSTEM (DBS) INTERFACES

8.3 DETACHED PAYLOAD CHARACTERISTICS

9.0 SOFTWARE FUNCTIONAL INTERFACES AND OVERVIEW (Sections 9.0 thru 9.2)

9.3 FLIGHT PHASE APPLICABILITY

9.4 SOFTWARE CONSTRAINTS/COMMUNICATION CONVENTIONS

10.0 INDUCED ENVIRONMENTS (Sections 10.0 thru 10.5)

10.6 ORBITER/CARGO BAY PARTICULATES AND GASES ENVIRONMENT

10.7 ELECTROMAGNETIC COMPATIBILITY (EMC) (Sections 10.7 thru 10.7.1)

10.7.2 SHUTTLE-PRODUCED INTERFERENCE ENVIRONMENT

10.7.3 ALLOWABLE CARGO-PRODUCED INTERFERENCE ENVIRONMENT

10.7.4 PAYLOAD AVIONICS ELECTRICAL COMPATIBILITY

10.8 NUCLEAR RADIATION, CARGO BAY LIGHTING, CARGO BAY FERRY FLIGHT ENVIRONMENT, PL HABITABLE VOLUME PARTICULATES AND GASES ENVIRONMENT

11.0 OTHER INTERFACE CONSTRAINTS AND LIMITATIONS (Sections 11.0 thru 11.1)

11.2.2 RCS/OMS ENGINES

11.2.3 VERNIER RCS (VRCS) ENGINES, EDGE AND PROTRUSION ROUNDING

12.0 RESERVED

13.0 ELECTRICAL WIRING INTERFACES AND ALLOCATIONS (Sections 13.0 thru 13.2.2)

13.2.3 SUBSTITUTION OF CARGO-UNIQUE ITEMS FOR STANDARD SERVICE ITEMS (Sections 13.2.3 thru 13.3.1)

13.3.2 ELECTRICAL POWER

13.4 STANDARD PAYLOAD DISPLAY AND CONTROL INTERFACE (SPDCI)

13.5 CONNECTOR/PIN INTERFACES WITH SMCH AND SMCH-SIP CONFIGURATION

13.6 NON-STANDARD CARGO INTERFACES (INDEPENDENT OF SMCH)

14.0 PAYLOAD DEPLOYMENT AND RETRIEVAL SYSTEM

APPENDIX A ABBREVIATIONS AND ACRONYMS

APPENDIX B GLOSSARY

APPENDIX C CHANNEL AND FREQUENCY ASSIGNMENTS

APPENDIX E EXTENDED DURATION ORBITER MISSIONS

APPENDIX I PAYLOAD ATTACH-POINT STATIC LIMIT-LOAD CAPABILITY

APPENDIX X ALTERNATE TRUNNION LENGTH SELECTION CRITERIA AND DEFLECTION DATA